The pellet production line is mainly composed of mixer, crusher, elevator, silo, pellet machine and other parts
Raw materials include sorghum, corn, soybean, wheat, rice, feed, etc. Stir well to meet various needs. Additives, probiotics, drugs, other grain powders, bone meal, fish meal and other protein additions
The materials after grinding and mixing are suitable for small feed mills, large and medium-sized farms (chicken farms, pig farms, cattle farms) and other feed processing. Can mix all kinds of dry powder feed, with feed pellet machine supporting use, raw materials can be a variety of grains: beans, corn, wheat, corn, etc.
A wide range of use to reduce farming costs a variety of scenarios can be easily handled, feed animals directly after mixing, or dock pellet units for deep pellet feed processing
1. Crush part
The wind generated by the rotor air disk sucks the raw materials that need to be crushed into the crusher, and under the continuous blow and collision of the hammer, it is rapidly broken into powder or granular, and then subjected to centrifugal force or air flow, and discharged into the impeller room of the inclined hopper A through the screen.
2. Mixing part
When the material propeller rotates, the material is forced into the skein blade by the impeller chamber B, and then the skein is lifted to the top of the mixing bucket. At this time, the material is evenly thrown in the mixing bucket. The rise and fall of the material in the mixing bucket and the left and right rotation are carried out continuously to form the mixing process, so as to achieve the mixing uniform effect.
3. Lifting part:
When the material is evenly mixed, step on the mixer pedal, the material flows into the hopper of the elevator, and is lifted to the bin by the jiaolong;
4, the raw materials stored in the silo are rotated by the flat skein cage, and the materials are transported to the granulator for granulation
