New Chaff Cutter 480-630: Cutting and Kneading Straw into Soft Feed
The 480-630 chaff cutter handles forage, king grass, sorghum stalks, wheat straw and other crop stalks in one pass. It cuts first and then kneads, and the cutting length is adjustable, so the same machine can produce different fineness for different feeding needs.
Kneading breaks the hard stem nodes on the surface of the straw. After rubbing, the forage becomes soft and filamentous with no hard sections, which improves palatability for cattle, sheep, chickens, pigs, geese and other livestock and poultry, and lifts the utilization rate of forage. For rural farmers and small to medium-sized feed processing plants, this is the straw processing machine they need.
The machine is mainly composed of a high discharge outlet, a dust removal port, a feed hopper, a protective cover, a low discharge outlet, a thickened bracket and moving wheels. The moving wheels make it easy to move the machine between the yard and the shed.
Model: 480-630
Motor: three-phase two-stage motor, 11kw/15kw
Diesel: 15hp/20hp
Weight: 160kg stand-alone, 250/270kg complete machine
Machine size: 120170190cm
Feed inlet: 65cm
Blade set: 3 guillotines, 16 flails, 8 serrated sharp knives, 24 kneading spinners
Hood shell iron sheet thickness: 5mm
Belt model: B1650
Hourly output: 8 tons
Barrel / wind silo size: 480-630, wind tank behind the barrel
