Corn Vertical Peeling and Hulling Machine
Peeling corn is fast on this vertical peeling and hulling machine. It works much faster than traditional manual peeling, and the operation is simple enough for any operator to pick up in a short time.
The peeling is clean and the grains stay whole, with very little breakage. The drum blade can be adjusted up and down, so both large cobs and small cobs are peeled clean on the same setting range instead of being sorted before processing.
The machine is made up of a feed port, a working room, a discharge port, a motor and a frame. Material enters through the feed port, is peeled and hulled in the working room, and leaves through the discharge port, with the motor and frame carrying the working parts.
Its main job is to complete three steps continuously through mechanical action: husk removal, corn shelling, and separation of kernels from cobs. During the process it also gives a preliminary screening of impurities, which raises corn processing efficiency and improves the quality of the final product.
Motor: 2.2kw
Capacity: 1-2ton/h
Weight: 60kg
Dimension: 600380840mm
