Email:admin@weiweimachinery.com Tel:+8619838691608 WhatsApp:+8619838691608 Address:Gaocunsi, Gaocun Township, Xingyang, Henan, China (Mainland)
Product knowledge
Your current location: Home > News > Product knowledge >
Broken Kernels Cost More Than Slow Threshing: Setting a 5TY-650 Corn Sheller for a Clean Sample — Weiwei Machinery
Update:2026-11-18 18:07:13    Views:
Corn is bought on grade. A load with visible broken kernels and husk is discounted, and the discount is usually larger than the value of the extra hour the farmer saved by running the sheller faster. That is the trade every operator makes, whether they realise it or not: feed faster, break more.
The 5TY-650 is a small machine: 2.2 to 3 kW on 220 V, main shaft at 2,000 rpm, 1.5 to 2 tonnes per hour, 52 kg, 900 by 500 by 850 mm, with a wheel at the front and a frame that stands level on packed ground. It is sized for a household or a village service, not a grain depot.
Inside, corn enters at the top right, either through an inclined or a vertical inlet depending on the build, and is struck by the rotating screw propeller shaft. Grain falls through the sieve, cobs are pushed out at the tail, and silks and husk leave through a separate outlet. The grain outlet carries a fan that blows light material clear, so what lands in the bag is cleaner than what came in.
Three things control the sample. The first is feed rate: pouring a bucket in at once loads the rotor, and a loaded rotor breaks kernels. The second is moisture. At 14 to 15 percent the grain shells off the cob cleanly; above 20 percent the kernel dents and cracks instead of releasing, and no amount of adjustment fixes that. The third is belt tension, which is the usual cause of a machine that suddenly starts leaving grain on the cob.
The machine will run on a motor, a diesel engine or a small gasoline engine, and the same frame takes all three, which matters where the harvest is in the field rather than the yard. Cobs come out one end and grain the other, so a two-person crew can keep up without a conveyor, and the whole unit can be lifted onto a pickup by two men rather than a loader.
The honest limit: two tonnes an hour is dry corn with one person feeding steadily. Wet corn drops to about half, and the broken kernel rate rises even with a gentle feed. For seed corn or premium lots, run it slower than the nameplate figure, or accept the discount.
Zhengzhou Weiwei Machinery has manufactured farm machinery in Xingyang, Henan since 1980, holds EU CE and ISO 9001 certification, and exports to more than 40 countries. For the 5TY-650 parameter sheet, sieve options or a price with freight, contact WhatsApp +8613526462915, email admin@weiweimachinery.com, or visit www.weiweimachinery.com.

weiwei machinery

corn sheller with fan cleaning

Next:最后一页
Relevant Article Recommended

24 hour hotline

+8619838691608

Contact
Tel:0086 371 63283021
WeChat:13939084108      /  19838691608
WhatsApp:+86 198 3869 1608
Email:admin@weiweimachinery.com
Address:Gaocunsi, Gaocun Township, Xingyang, Henan, China (Mainland)
WeChat: 19838691608 Email:admin@weiweimachinery.com Address:Gaocunsi, Gaocun Township, Xingyang, Henan, China (Mainland)

Hotline:

+8619838691608

Wechat Qrcode

WhatsApp