Email:admin@weiweimachinery.com Tel:+8619838691608 WhatsApp:+8619838691608 Address:Gaocunsi, Gaocun Township, Xingyang, Henan, China (Mainland)
Product knowledge
Your current location: Home > News > Product knowledge >
One Motor, Two Jobs: A Combined Rice Mill and Tooth-Claw Disc Grinder for Village Milling — Weiwei Machinery
Update:2026-11-16 18:59:14    Views:
A rice farmer sells paddy by weight and buys rice by weight, and the difference is somebody else's income. Milling it locally keeps the bran, the broken rice and the retail margin in the village. That is the whole business case for a small mill: not tonnage, but the gap between what a trader pays for paddy and what a household pays for clean rice.
The usual first purchase is a rice mill only, and it is the usual mistake. Once the mill is running, everyone in the village wants maize ground for feed, chillies and spices powdered, and cassava or soya milled — and none of that a rice mill can do. So a second machine arrives, with a second motor, a second starter and a second electricity bill for a workshop that may only work half a day.
The 6N-40-9FC-21 is built as one unit for this reason. On the left is the rice mill; on the right, on the same frame, a tooth-claw disc grinder. One 1.5–2.2 kW motor at 220 V drives both through belts, so the two jobs never need two supplies — and 220 V single phase is what most rural compounds actually have. The mill handles 150–200 kg/h of paddy at a rated 1,200–1,600 r/min; the grinder does 140–220 kg/h at 4,500–5,500 r/min. Power consumption is quoted at no more than 20 kWh per tonne for milling and 22 kWh per tonne for grinding, and the whole frame weighs 54 kg without the motor, at 1,120 × 400 × 1,160 mm.
How well it performs is mostly a matter of one adjustment. Inside the milling chamber the paddy is pressed between the roller and the rice screen; more pressure whitens the grain faster but raises the broken percentage, and less pressure protects the grain but needs a second pass. The discharge port separates whole rice from broken, and the bran and fine broken grains pass the screen into the bran bag — which is feed, and feed is the second income. On the grinder, the screen sets the fineness: two screens ship with the machine, and 4 square and 4 flat teeth do the work on the rotor. Where the supply is 380 V and the demand is larger, the 9FC-35 and 9FC-45 grinders take 7.5 kW to 15 kW.
Zhengzhou Weiwei Machinery has manufactured grain and feed machinery in Xingyang, Henan since 1980, holds ISO 9001 and EU CE certification, and exports complete machines and spare parts worldwide. Tell us your daily paddy volume and your voltage, and we will confirm the model, the screen set and the spare tooth kit. WhatsApp +8613526462915, admin@weiweimachinery.com, or send an enquiry from www.weiweimachinery.com.

paddy milling machine

Weiwei rice mill

Next:最后一页
Relevant Article Recommended

24 hour hotline

+8619838691608

Contact
Tel:0086 371 63283021
WeChat:13939084108      /  19838691608
WhatsApp:+86 198 3869 1608
Email:admin@weiweimachinery.com
Address:Gaocunsi, Gaocun Township, Xingyang, Henan, China (Mainland)
WeChat: 19838691608 Email:admin@weiweimachinery.com Address:Gaocunsi, Gaocun Township, Xingyang, Henan, China (Mainland)

Hotline:

+8619838691608

Wechat Qrcode

WhatsApp