Email:admin@weiweimachinery.com Tel:+8619838691608 WhatsApp:+8619838691608 Address:Gaocunsi, Gaocun Township, Xingyang, Henan, China (Mainland)
Product knowledge
Your current location: Home > News > Product knowledge >
Portable Guillotine Shredder Maintenance: Check Every Screw, Grease the Bearings, Tighten the Locking Screws
Update:2025-03-12 11:23:13    Views:
A portable guillotine shredder is a simple machine, and most of its trouble comes from two places: fasteners that work loose and bearings that run dry. Regular maintenance is mostly a matter of checking both before either one turns into a breakdown.
 
Go over every screw on the machine and make sure each one is tight. A shredder vibrates while it works, and vibration is what walks a screw out of its thread over time. Checking during the working season and tightening a loose screw on the spot costs a few minutes, while leaving one loose until the frame works free costs a day of repair.
 
The bearings need regular attention as well. Grease goes in through the oil injection nozzle on each bearing, so a grease gun belongs in the maintenance kit rather than being an optional extra. A bearing that runs without grease heats up, and a hot bearing is what seizes a shaft in the middle of a harvest.
 
The positioning screws that hold the bearings need frequent checks too. If one works loose, the bearing can shift in its seat and the shaft no longer runs true. That shows up first as noise and vibration, then as wear on the bearing itself, so tightening these screws in time is what keeps the shaft aligned.
 
None of these checks takes long, and together they cover the failures that stop a shredder halfway through a season. Zhengzhou Weiwei Machinery has built farm machinery since 1980 and holds ISO9001, CE, SGS and TUV certification. Chaff cutters, shredders, kneading machines and pellet machines from Weiwei are exported to the Americas, Africa, Southeast Asia and South Asia, with after-sales service and spare parts support.
Relevant Article Recommended

24 hour hotline

+8619838691608

Contact
Tel:0086 371 63283021
WeChat:13939084108      /  19838691608
WhatsApp:+86 198 3869 1608
Email:admin@weiweimachinery.com
Address:Gaocunsi, Gaocun Township, Xingyang, Henan, China (Mainland)
WeChat: 19838691608 Email:admin@weiweimachinery.com Address:Gaocunsi, Gaocun Township, Xingyang, Henan, China (Mainland)

Hotline:

+8619838691608

Wechat Qrcode

WhatsApp