Email:admin@weiweimachinery.com Tel:+8619838691608 WhatsApp:+8619838691608 Address:Gaocunsi, Gaocun Township, Xingyang, Henan, China (Mainland)
Product knowledge
Your current location: Home > News > Product knowledge >
Two Gearboxes on One Chopper: Changing Cut Length Without Stopping the Line or the Motor — Weiwei Machinery
Update:2026-11-19 17:05:53    Views:
Most chopper owners judge a machine by its hourly tonnage and then lose that tonnage somewhere else: in the four minutes it takes to stop the motor, open the side cover, pull two gears and put them back the other way round. Do that twice a day and a machine rated at 4.5 t/h delivers closer to four.

The 9ZP-4.5 is built around that stop-and-swap problem. It runs 1.5–4.5 t/h on a 5.5 kW motor turning at 1440 rpm, with a blade disc at 800 rpm and four moving blades. Weight is 300 kg or 360 kg depending on the frame and wheel set.

The first gearbox sets length. Instead of exchanging gears, the operator moves a lever and the feed roller speed changes against the fixed blade disc speed. Longer straw for cattle that need to chew, shorter for sheep and goats that sort long pieces out of the trough. The blade disc itself never changes speed, so throughput stays stable across the range.

The second gearbox reverses the feed. Wet maize straw, vine crops and anything with a high moisture content will bridge in the chute. On a single-gearbox machine, the operator reaches in with a hook while the rotor is still turning. Here the rollers run backwards for a few seconds, the wad drops out, and the machine goes back to work. That is the difference between a two-minute interruption and a jam that ends the afternoon.

Blades are 65# steel fan-shaped knives, heat treated, chosen because the fan shape also moves air — the same blade that cuts pushes the material toward the outlet. UC series bearings self-align, which matters on a frame that sees constant vibration. The drive wheel carries a ballast weight to raise inertia: when a thick bundle hits the blades, stored energy carries the rotor through instead of stalling the motor.

Where it fits: a herd of 30 to 80 head, one person feeding, a shed or a yard with three-phase power. For a smaller operation the same series starts at 9ZP-3 (1–3 t/h, 4 kW, 150 kg); above it sit the 9ZP-6.5 (2.5–6.5 t/h, 7.5 kW) and 9ZP-10 (3–10 t/h, 15 kW), which need a bigger supply and a floor foundation.

Zhengzhou Weiwei Machinery has built agricultural and forestry machines since 1980, with CE and ISO9001 certification and an output of 40,000 to 50,000 units a year. If you are working out which tonnage matches your daily feeding, send the herd size and the crops you grow on WhatsApp +8613526462915 or by email to admin@weiweimachinery.com, and we will come back with a model and a power requirement rather than a price list.

weiwei machinery

chopper feed jam


Next:最后一页
Relevant Article Recommended

24 hour hotline

+8619838691608

Contact
Tel:0086 371 63283021
WeChat:13939084108      /  19838691608
WhatsApp:+86 198 3869 1608
Email:admin@weiweimachinery.com
Address:Gaocunsi, Gaocun Township, Xingyang, Henan, China (Mainland)
WeChat: 19838691608 Email:admin@weiweimachinery.com Address:Gaocunsi, Gaocun Township, Xingyang, Henan, China (Mainland)

Hotline:

+8619838691608

Wechat Qrcode

WhatsApp