A circular log saw removes that variable. The blade is fixed to a steel bench, the log lies in a V-shaped cradle that keeps it square to the blade, and a clamp or push carriage carries it forward. Because the blade is guided by the machine and not by a wrist, every face is flat and every length the same. Our saw sits on four wheels with two lifting handles, so one man moves it around the yard, and the control box groups the start, stop and emergency stop within reach of the operator.
Blade diameter is the number that decides the machine. A log has to clear the blade before it can be cut through, so the biggest log you intend to process sets the blade, and the blade sets the frame. Tell us the largest diameter in your pile rather than the average, because the one oversized butt log is what stops a working day.
Cut length is a market decision, not an engineering one. Twenty-five centimetres suits stoves, thirty-three suits most European fireplaces, fifty suits boilers and sauna stoves. Setting the cradle stop once keeps all three consistent, and consistent length is what lets a producer quote by the cubic metre instead of by guesswork.
Safety on this machine is mostly geometry. The guard must cover the top of the blade at every cutting position, the log must be clamped rather than hand-held on short pieces, and crotch wood should be split first instead of forced. A dull blade is the other risk: it burns its way through the log, heats the plate and starts throwing dust instead of chips.
A saw of this size pays for itself in a single heating season for most small producers, and it turns a waste stream into a saleable one. The sawdust it makes is clean, dry and consistent — briquette and pellet makers buy it, and so do mushroom farms and stables.
Zhengzhou Weiwei Machinery has built feed and biomass machinery since 1980, works to CE and ISO9001, and ships single machines and complete lines to Africa, Southeast Asia, South America and the Middle East.
Send us the largest log diameter in your pile, the cut length your market asks for, and your site voltage. We will confirm the blade and motor combination before you book freight.
