The 9ZP-6.5 runs a blade disc at 650 rpm with three or four moving blades on a 7.5 kW motor, at 2.5–6.5 t/h. Weight is 420 kg or 460 kg depending on frame and wheel set.
The arithmetic is simple and it is not a small difference. Three blades passing a fixed knife at 650 rpm produce about 1,950 cuts per minute; four blades produce about 2,600. Every cut is a fixed knife meeting a moving blade, so the length of the piece between cuts is set by how far the feed roller advances between passes. More cuts per minute, at the same feed rate, means shorter pieces — roughly a quarter shorter going from three blades to four.
What that costs. Each additional blade is another knife taking a full-depth bite. Power draw and cutting resistance climb with the count, and on wet maize straw the difference is audible: the motor note deepens on four blades. That is why the factory offers both rather than fitting four as standard — a machine running at the edge of its 7.5 kW is not faster, it is just closer to tripping.
Match it to how the animal eats. Cattle wrap their tongue around forage and have no upper incisors; a 40–50 mm piece is manageable and a long piece is not wasted. Sheep and goats sort long strands out of the trough and leave them, so they need the shorter setting. If one machine has to serve both, four blades with the gearbox set to the long position is the compromise that keeps both groups eating.
Cut length is then trimmed with the gearbox, not with the blades. A lever changes the feed roller speed against the fixed disc speed, so length can be adjusted in steps across the day without touching a knife or stopping the motor. Blades set the baseline; the gearbox sets the variation.
Blades are 65# steel fan-shaped knives, heat treated, and the fan shape doubles as the air mover that throws material out of the outlet. The drive wheel carries a ballast weight so that stored inertia carries the rotor through a thick bundle instead of stalling. UC bearings self-align on a frame that works under constant vibration.
Above this model sits the 9ZP-10 (3–10 t/h, 15 kW, 500 rpm disc), below it the 9ZP-4.5 (1.5–4.5 t/h, 5.5 kW, 800 rpm). Weiwei Machinery has manufactured farm machinery since 1980 under CE and ISO9001, exporting to more than 40 countries. Tell us the animals you feed and the straw you have — WhatsApp +8613526462915 or admin@weiweimachinery.com — and we will specify the blade count with the machine rather than leave it to chance.









