Email:admin@weiweimachinery.com Tel:+8619838691608 WhatsApp:+8619838691608 Address:Gaocunsi, Gaocun Township, Xingyang, Henan, China (Mainland)
Product knowledge
Your current location: Home > News > Product knowledge >
Chopped Grass at Two Metres: Why Discharge Height Decides How Much Silage Labour You Need — Weiwei Machinery
Update:2026-11-19 17:33:16    Views:
Walk into a small dairy and watch where the chopped grass goes. On most machines it lands in a heap at the operator's feet, and someone spends the next hour forking it into a cart. The chopper is rated at two tonnes an hour; the crew moves two tonnes an hour by hand. The machine was never the bottleneck.

The 9ZP-1.8 is a vertical chopper, and the vertical layout exists for one reason: the outlet sits 2,030 mm above the floor, with a 3–5 m blowing distance. A trailer backed up to the machine is filled from above. A silage pit is filled by aiming the spout. Nobody stands at the outlet.

Output is crop-dependent, not one number. The same machine does 1.8 t/h on chaff, 1.5 t/h on straw, 1.8 t/h on maize straw and 4 t/h on silage. Silage moves faster because wet material is heavier and feeds itself down the chute; dry straw is light and has to be pushed. Quoting one figure for all four is how buyers end up disappointed in the field.

Three cut lengths, set by blade count and gear position. With three, four or six blades the cut falls into long, medium and short bands — 45 / 34 / 20 mm, 27 / 20 / 12 mm, 16 / 12 / 5 mm. Six blades give the shortest cut and the highest power draw; three blades give the longest cut and the easiest run. Match it to the animal: cattle manage 45 mm, sheep and rabbits need the short setting.

The straw is gripped by upper and lower pressure rollers before it reaches the blade, at a controlled rate, so the cut stays even instead of tearing. A comb plate ahead of the rollers separates bunched material and stops long stalks from wrapping the shaft. The spindle runs at 795 rpm on a 2.7–3.0 kW motor, and the blade disc carries a fan wheel that provides the air for the blowing distance.

Transport size matters as much as working size. Working footprint is 1,000 × 1,095 × 2,030 mm; folded for shipping it is 700 × 335 × 1,130 mm. That is a machine one person can move on a small truck, and a container load that makes sense for a dealer. Power can be electric motor, diesel or gasoline on the same frame.

The smaller 9ZP-1.5 shares the frame and the 795 rpm spindle at 1.5 t/h on chaff and 80–90 kg; the 1.8 runs 90–100 kg. Weiwei Machinery has manufactured farm and forestry equipment since 1980, holds CE and ISO9001, and ships to more than 40 countries. Tell us your animals, your daily tonnage and whether you have three-phase power — WhatsApp +8613526462915 or admin@weiweimachinery.com — and we will confirm which of the two models and which blade count fits.

weiwei machinery

cut length adjustment


Next:最后一页
Relevant Article Recommended

24 hour hotline

+8619838691608

Contact
Tel:0086 371 63283021
WeChat:13939084108      /  19838691608
WhatsApp:+86 198 3869 1608
Email:admin@weiweimachinery.com
Address:Gaocunsi, Gaocun Township, Xingyang, Henan, China (Mainland)
WeChat: 19838691608 Email:admin@weiweimachinery.com Address:Gaocunsi, Gaocun Township, Xingyang, Henan, China (Mainland)

Hotline:

+8619838691608

Wechat Qrcode

WhatsApp