There are two common ways to make tall equipment fit the building. The first is to raise the workshop: build a higher clear-height structure, or add a steel mezzanine and operating platform so the pellet mill, mixer and cooler sit on an upper level while bags and bins are filled from below. This keeps everything above ground, which is easy to clean, inspect and service. The second is to sink a pit: the elevator base, conveyor inlet or cooler discharge is set below floor level, so the machine top still fits under the roof while its outlet meets the floor for direct bagging or truck loading. Pits save overall building height and suit retrofit sites, but need proper waterproofing and drainage. Many Weiwei customers combine both — a partial pit for the bucket elevator and a raised platform for the cooler and bins.

Weiwei Machinery designs each production line around the customer's actual building rather than a fixed drawing. Before quotation, the export team asks for the workshop length, width and clear height, plus whether a pit can be excavated on site — then supplies a layout drawing showing equipment positions, platform heights and pit depths, so the line is delivered ready to drop into the plant. For a tailored workshop layout and a pit-or-platform recommendation for your feed or biomass pellet line, contact the Weiwei Machinery export team or visit weiweimachinery.com.